Upgrade using Phoenix (easier way)

Only for model LY-F1/DT-M7032/LT704A only (512MB RAM)

Before start upgrade, please download the flashing tools & firmware.

flashing tools: Phoenix (4.55mb)
usb driver (if applicable) : adb usb driver (34kb)

New firmware 14/04/2012: Download

Change log:
A10, 4.0 firmware update to 140412 available for download, user requirements should be, I do support 39 models of the 3G network card set up inside (Set - More-3G Support Information).




Upgrade instruction:

*Do not power on your tablet first & make sure the battery is more than 30%.

1. install PhoenixPack.exe, then it will create shortcut on the computer desktop.
2. then run PhoenixUSBPro.exe from the computer desktop.
3. select image (in firmware folder) & click open.

















4. select key (in firmware folder) & click open.

















5. click start, and the icon will change to green. (don't connect your tablet to computer first)

















6. press and hold Vol+ button, connect miniUSB cable and do fast press Power On button (10-12 times).
7. firmware updating process will start automatically.

















8. wait for few minutes until the installation complete. Disconnect miniUSB cable.

















9. Press and hold the Power button on tablet (for 10 sec) then device will turns off. After that you can turn on tablet as usually by pressing power button for 3 seconds.

# First booting may take a long time. If it takes more than 15 min then use Reset button in a hole on tablet body.



APK: ES file manager
android system info v.1.18.2
astro file manager



3G SETTING

Celcom 3G

Name : Celcom 3G
APN : celcom3g
MCC : 502
MNC : 19

Digi Internet

Name : Digi Internet
APN : diginet
MCC : 502
MNC : 16

Maxis 3G

Name : Maxis 3G
APN : unet
MCC : 502
MNC : 12
User: maxis (if applicable)
Password: wap (if applicable)

U Mobile

Name : U Mobile Internet
APN : my3g
MCC : 502
MNC : 18

Add New APN (For android 2.3 only):

Android APN setting
1) Home -> Menu -> Settings -> Wireless & networks -> Mobile networks -> Access Points Name
2) Menu -> New APN


























* If "Add New APN" bar not showing after pressing the menu button, pls wait for 15 seconds, and press the menu button again.









Just key-in 4 important parts will do: Name, APN, MCC & MNC. The others just leave it blank.
After setting done, press menu button to save setting. (setting will not be saved if press back button)